Burst Pipe Repair Services

A burst pipe is one of the fastest ways for water to do serious damage to your home. Whether it's a small crack that started as a drip or a full break sending water spraying into a wall, the longer it goes, the more expensive the repair — and the bigger the mess.

At Yeehaw Plumbing, we handle emergency burst pipe repair across Summerville, Charleston, and the surrounding Lowcountry. We're available Monday through Saturday 24 hours a day and Sunday 7am to 4pm, so if a pipe bursts at 2am on a Tuesday, we're the ones answering the phone.

Call us at (843) 509-6943 and we'll help you shut down the water and get someone out fast.

‍

Common Causes of Burst Pipes

‍

Burst pipes usually don't happen out of nowhere. Most of the time, something has been building up for a while.

Common causes we see around the Lowcountry:

• Corrosion in older copper or galvanized pipes
• High water pressure with no regulator
• Sudden pressure spikes from utility work
• Freezing during a Lowcountry cold snap (rare, but it happens)
• Shifting soil putting stress on buried lines
• Failed joints, worn washers, or old flexible connectors
• Roots pushing into underground water lines

Whatever caused it, we'll find the source and fix it so it doesn't come right back.

‍

Signs You May Have a Burst Pipe

‍

Not sure if what you're dealing with is a burst pipe or something else? Here are a few common signs:

• Water spraying, dripping, or pouring from a wall, ceiling, or floor
• A sudden jump in your water bill with no explanation
• Sounds of running water when nothing is turned on
• Wet or discolored spots on drywall, ceilings, or flooring
• Low water pressure across the whole house
• Loss of hot water pressure only (may point to a hot water line burst)
• Musty smells or damp air in a room that shouldn't be damp
• Your water meter is spinning when everything is turned off

If you're seeing any of these, don't wait — the faster it's addressed, the less damage you're dealing with.

‍

Our Burst Pipe Repair Process

‍

Every burst pipe call starts with figuring out what we're actually dealing with. Sometimes the break is right in front of you. Other times it's inside a wall, above a ceiling, or under the slab.

‍

Our process:

• Shut off water at the closest valve to stop the leak
• Locate the exact break, opening only the drywall or ceiling we have to
• Cut out the damaged section of pipe
• Replace it with new pipe matching your existing plumbing (copper, PEX, CPVC, or PVC)
• Pressure test the repair before turning water back on
• Show you what we found and what caused it
• Flag any related issues so you can decide what's worth fixing while we're there

You get upfront pricing before any work starts. No surprise fees for emergency response.

‍

Burst Pipe Repair vs. Emergency Plumbing — What's the Difference?

A burst pipe is one type of plumbing emergency, but not every plumbing emergency is a burst pipe. Burst pipe repair specifically deals with a supply line that has cracked, split, or fully broken — most often from corrosion, freezing, high pressure, or age. We come out, locate the break, cut out the damaged section, and replace it.

Our emergency plumbing services cover everything else that can't wait — major leaks that aren't full bursts, sewer backups, water heater failures, overflowing toilets that won't stop, and other urgent situations.

Not sure which you need? Just call. We'll figure it out over the phone based on what you're seeing, and either way, we'll get someone to you fast.

‍

What to Do While You Wait for a Plumber

‍

While you're waiting for us to arrive, a few simple steps can keep the situation from getting worse:

• Shut off your home's main water valve if you can safely reach it (usually in the garage, near the water heater, or outside near the meter)
• If it's a hot water line burst, shut off the water heater too
• Turn off electricity to any rooms with standing water or a wet ceiling before you go in
• Move rugs, electronics, and anything valuable away from the water
• Snap photos of the damage for your insurance claim
• Skip chemical drain cleaners and DIY patches — they can make the real repair harder

A quick call to (843) 509-6943 and we can walk you through the shutoff by phone if you can't find the valve.

‍

Serving Homes Across the Lowcountry

‍

We provide emergency burst pipe repair throughout:

• Summerville
• Goose Creek
• Ladson
• Charleston
• North Charleston
• Mount Pleasant
• James Island
• Johns Island
• West Ashley
• Surrounding areas

No matter where you are in the area, our team is ready to help.

‍

Have a burst pipe right now? Call (843) 509-6943 for emergency service across Summerville and the greater Charleston area. Every minute you wait is more water damage. Honest, upfront pricing — you'll know the cost before we start.

‍

Frequently Asked Questions

‍

Q: What should I do the moment a pipe bursts?

‍A: Shut off the main water valve to your home if you can safely reach it. Then turn off electricity to any rooms with standing water. Move valuables out of the water, snap a few photos for insurance, and call us. We can walk you through the shutoff over the phone if you're having trouble.

‍

Q: Where is my main water shutoff valve?

‍A: It's usually in the garage, in the basement, near the water heater, or outside near the meter. Turn it clockwise until it stops. If you can't find it, call us and we'll help you locate it over the phone while we're on the way.

‍

Q: How quickly can you come out for a burst pipe?

‍A: We provide emergency response for burst pipes across Summerville and the greater Charleston area. Call us and we'll give you a real ETA based on where you are and what we've got going on.

‍

Q: What causes pipes to burst in South Carolina?

‍A: Around here, the most common causes are corrosion in aging pipes, high water pressure, sandy soil shifting under buried lines, and the occasional deep freeze. Failed connections at fixtures and appliances also cause a lot of "burst" calls that turn out to be joint failures.

‍

Q: How much does burst pipe repair cost in Summerville, SC?

‍

‍A: It depends on where the break is, what kind of pipe it is, and how much wall or ceiling we have to open to reach it. We give upfront pricing before any work starts — no surprise fees for emergency response.

‍

Q: Can a burst pipe be repaired, or does the whole line need replacing?

‍

‍A: Usually we can cut out the damaged section and splice in new pipe. But if the burst is part of a larger corroded run, replacing a bigger section may make more sense than fixing one spot that'll fail again in a year. We'll show you what we find and give you honest options.

‍

Q: Does homeowners insurance cover burst pipes?

‍A: Most policies cover sudden and accidental water damage from a burst pipe. Take photos before and during cleanup and hold onto our repair invoice — those help with your claim. Your insurance company will have the final word on coverage.

‍

Q: Can I prevent burst pipes?

‍A: A pressure regulator, insulation on exposed pipes, and periodic checks on aging supply lines all help. If your home has galvanized or old copper piping, a plumbing inspection can flag lines that are running on borrowed time before they fail.

‍

Q: What's the difference between a burst pipe and a leaking pipe?

‍A: A leak is usually slow — a drip or seep you might not notice right away. A burst is fast — a crack or full break where water is actively spraying, pouring, or flooding. Both need to be fixed, but a burst pipe needs immediate action to stop water damage.

‍

Q: Do you fix burst pipes at night or on weekends?

‍A: Yes. We're available Monday through Saturday 24 hours a day and Sunday 7am to 4pm for burst pipe emergencies.

‍