Faucet Repair Services

That constant drip you hear at night from the kitchen sink? It's more than a nuisance. A single faucet leaking one drip per second wastes over 3,000 gallons of water a year. That's a real hit to your water bill and a real problem for your plumbing over time — leaks around a faucet can cause damage to the countertop, cabinet, or wall behind it.

At Yeehaw Plumbing, we handle faucet repair across Summerville, Charleston, and the surrounding Lowcountry. Kitchen sinks, bathroom sinks, tubs, showers, laundry rooms, outdoor spigots — if it's got a faucet, we can fix it. Most faucet repairs wrap up in a single visit with parts we carry on the truck.

Call (843) 509-6943 and we can usually get you a same-day appointment.

‍

Common Faucet Problems

‍

Faucets have surprisingly small moving parts that wear out over time. Some of the most common issues we see:

‍

• Constant dripping from the spout, even when fully closed
• Low water pressure at one faucet while others are fine
• Water leaking from the base of the faucet
• Handle that's hard to turn, loose, or won't stay in position
• Water dripping under the sink, not from the spout
• Sprayer or pull-out head that won't retract or leaks
• Corrosion, green buildup, or mineral scale on fixtures
• Faucet that won't fully shut off no matter how tight you turn it
• Discolored or sputtering water from the tap

Most of these are fixable without replacing the whole faucet. We start by figuring out which part is causing the issue.

‍

Signs You Need Faucet Repair

‍

Some faucet problems are obvious. Others sneak up on you. Signs it's time to call:

‍

• Any active drip, even a slow one
• Water bill jumped for no obvious reason
• Handle takes more force to turn than it used to
• Rust stains in the sink under the faucet
• Water pooling around the base of the faucet
• Corrosion visible on the fixture or on the supply lines under the sink
• Sprayer or pull-out doesn't work right

A dripping faucet is one of the cheapest, easiest plumbing problems to fix — and one of the most expensive to ignore.

‍

Our Faucet Repair Process

‍

Every faucet call starts with figuring out what's actually broken. Sometimes it's a $5 cartridge. Sometimes it's a worn-out O-ring. Sometimes the faucet itself has corroded to the point where replacement is the smarter move.

‍

Our process:

‍

• Diagnose the issue on-site (dripping, leaking base, low pressure, hard handle, etc.)
• Explain what's wrong and what it'll cost before doing any work
• Repair or replace the failed parts — cartridge, O-rings, aerator, valve stem, or supply lines
• Clean out any mineral buildup that's affecting flow or seal
• Test the faucet across hot, cold, and mixed positions
• Show you what we found and what caused it
• Flag any related issues under the sink so you can decide what's worth fixing while we're there

Most faucet repairs are one-visit jobs. We carry common parts for major brands on the truck.

‍

Faucet Repair vs. Faucet Installation — What's the Difference?

‍

Faucet repair fixes the faucet you already have. A dripping spout, a leaky cartridge, low pressure, or a hard-to-turn handle can almost always be fixed without replacing the whole fixture. If the faucet body is cracked, badly corroded, or you're just ready for a new look, replacement is the way to go.

Faucet installation is what we do when you're putting in a new faucet — either replacing an old one or upgrading during a kitchen or bath project. That's a different job with different pricing.

Not sure which you need? We'll take a look and give you a straight answer, including whether a repair is worth doing or whether replacement makes more sense.

Faucet repair is one of our core plumbing repair services — check the full list if you're dealing with more than a faucet issue.

‍

What to Do While You Wait for a Plumber

‍

If your faucet is leaking or dripping and you'd like to slow the damage before we arrive:

• Turn off the water supply valves under the sink (small round knobs, turn clockwise)
• If the valves under the sink are stuck or you can't find them, shut off water at the main
• Put a bucket or container under the leak to catch the drip
• Move anything valuable out from under the sink and away from the leak
• Snap a photo of the faucet — brand, model, and general condition can help us bring the right parts

A quick call to (843) 509-6943 and we can walk you through any of this by phone.

‍

Serving Homes Across the Lowcountry

‍

We provide faucet repair throughout:

• Summerville
• Goose Creek
• Charleston
• North Charleston
• Mount Pleasant
• Ladson
• James Island
• Johns Island
• West Ashley

‍

No matter where you are in the area, our team is ready to help.

Faucet giving you trouble? Call (843) 509-6943 for same-day faucet repair across Summerville and the greater Charleston area. Honest, upfront pricing — you'll know the cost before we start. Yeehaw Plumbing is your local Summerville plumber for repairs, installs, and emergencies across the Lowcountry.

‍

Frequently Asked Questions

‍

Q: Why does my faucet keep dripping?

‍A: Almost always a worn cartridge, valve stem, or O-ring inside the faucet. These are the parts that create the seal that shuts the water off when you close the handle. Once they wear out, water sneaks past. Most are cheap parts and quick to replace.

‍

Q: How much does faucet repair cost in Summerville, SC?

‍

‍A: It depends on the type of faucet and what's broken. A cartridge or O-ring replacement is quick and inexpensive. Fixing a leak under the sink usually costs a bit more. If parts are hard to source (older or specialty faucets), that can affect the total. We give upfront pricing before starting.

‍

Q: Is it worth repairing an old faucet or should I replace it?

‍

‍A: If the faucet body itself is cracked, badly corroded, or you're just tired of it, replacement is the way to go. But most working faucets have repairable parts inside. If the faucet is under 10 years old and it's a decent brand, repairing is usually the cheaper call.

‍

Q: How long does faucet repair take?

‍

‍A: Most cartridge, O-ring, or aerator repairs take 30 to 60 minutes. Replacing supply lines under the sink or fixing a leak at the base takes a bit longer.

‍

Q: Why is my water pressure low at just one faucet?

‍

‍A: Usually a clogged aerator (the little screen at the tip of the spout) or mineral buildup in the cartridge. Both are easy to clean or replace. If it's a pull-out or sprayer, the issue is often in the diverter valve or the hose.

‍

Q: Can I replace a faucet cartridge myself?

‍

‍A: If you're comfortable and can find the right part, sure. The tricky part is identifying the exact cartridge — brands aren't interchangeable and older faucets can be hard to match. If you'd rather not deal with a plumbing store run and possible wrong parts, we handle it.

‍

Q: Why does the water sputter when I turn the faucet on?

‍

‍A: Usually air in the line or a clogged aerator. If it's happening at every fixture, air may have gotten in during recent plumbing work or a water shutoff. If it's just one faucet, a clean aerator usually solves it.

‍

Q: My handle is really hard to turn. Is that a problem?

‍

‍A: Yes, worth fixing. A stiff handle usually means the cartridge or valve stem is worn or corroded. If you force it, you can crack the faucet body — which turns a $50 repair into a full replacement. Cheaper to fix it now.

‍

Q: Does hard water damage faucets?

‍

‍A: Yes, especially over time. Mineral buildup clogs aerators, wears out cartridges faster, and leaves the scale you see on chrome finishes. Around the Lowcountry, hard water is a common cause of faucet issues. A whole-house filtration system can slow this down if you're dealing with faucet problems constantly.

‍

Q: Do you install new faucets too?

‍

‍A: Yes. If you're ready to replace a faucet — either because the old one is past saving or you're updating the look of your kitchen or bath — we handle faucet installation as well. Just let us know what you're planning.

‍