Faucet Installation services

A well-installed faucet lasts for years and feels good every time you use it. A rushed install shows up as a leak under the sink six months later, a loose handle within a year, or a slow drip that won't quite go away. That's why we take the extra time to install faucets right — proper mounting, correct sealing, clean connections, and a full pressure test before we call it done.

At Yeehaw Plumbing, we handle faucet installation across Summerville, Charleston, and the surrounding Lowcountry. Kitchen sinks, bathroom sinks, laundry rooms, tubs, showers, and outdoor spigots — if it needs a new faucet installed, we can help.

Call (843) 509-6943 to schedule.

‍

Types of Faucet Installations We Handle

‍

We install every type of household faucet:

‍

• Kitchen sink faucets (single-handle, double-handle, pull-out, pull-down, touchless)
• Bathroom sink faucets (single-hole, widespread, wall-mount, vessel-sink)
• Tub and shower faucets and diverters
• Laundry room utility faucets
• Outdoor spigots and hose bibs
• Kitchen prep sink and bar sink faucets
• Pot fillers and dedicated drinking water faucets

If you're not sure what type of faucet fits your sink or setup, we can help you figure that out before you buy.

‍

When to Consider a New Faucet

‍

Some common reasons people call us for a new faucet install:

‍

• The faucet is dripping or leaking and repair costs are getting close to replacement
• Corroded or worn fixtures that look bad no matter how much you clean them
• Handles that are stiff, wobbly, or hard to use
• Low water pressure that persists even after cleaning the aerator
• Renovating a kitchen or bathroom
• Upgrading to a water-saving model
• New home construction or an addition
• Style upgrade to match a room refresh

If any of these sound like your situation, we can talk through options and pricing.

‍

Our Faucet Installation Process

‍

For most faucet installs, our process:

‍

• Discuss what you want installed (or help you pick if you haven't yet)
• Turn off the water supply and prep the work area
• Remove the old faucet and clean the mounting area
• Install the new faucet per manufacturer specs
• Connect supply lines with proper sealing (new lines if needed)
• Test the faucet at hot, cold, and mixed positions
• Check under the sink for any leaks at connections
• Show you how to use any new features (touchless controls, sprayer modes, etc.)
• Haul away the old faucet unless you want to keep it

Most single-faucet installations take 30 to 90 minutes, depending on the setup.

‍

Faucet Installation vs. Faucet Repair — What's the Difference?

‍

Faucet installation puts a new faucet in place. You're replacing an old one, upgrading, or installing in a spot that didn't have one before. Different job, different pricing.

Faucet repair fixes what's already there. Dripping spout, leaky base, hard-to-turn handle — most of those can be fixed without replacing the whole faucet. If your current faucet is decent quality and less than 10 years old, repair is often the smarter call.

Not sure which you need? A quick look and we can tell you whether repair makes sense or whether replacement is the better move. See our faucet repair page for the repair side.

‍

What to Do Before We Arrive

‍

To keep things moving smoothly:

‍

• If you've already bought the faucet, have it and all its parts ready
• Clear the space under the sink so we have room to work
• Take photos of the current faucet — helps us bring the right supply lines and adapters
• If you're not sure what size or type of faucet you need, wait to buy until we take a look

‍

A quick call to (843) 509-6943 and we can help you figure out what you need before you buy anything.

‍

Serving Homes Across the Lowcountry

‍

We provide faucet installation throughout:

‍

• Summerville
• Goose Creek
• Ladson
• Charleston
• North Charleston
• Mount Pleasant
• James Island
• Johns Island
• West Ashley
• Surrounding areas

‍

No matter where you are in the area, our team is ready to help.

Ready for a new faucet? Call (843) 509-6943 for faucet installation across Summerville and the greater Charleston area. Honest, upfront pricing — you'll know the cost before we start.

‍

Faucet installation is one of our core plumbing installation services at Yeehaw Plumbing — see the full list if you're planning more than one fixture.

‍

Frequently Asked Questions

‍

Q: Do you install any brand of faucet?

‍

‍A: We install every major brand — Moen, Delta, Kohler, Grohe, Pfister, American Standard, Rohl, and others. If you're looking at a specialty or high-end brand, mention it when you call so we can make sure we have any brand-specific tools or adapters needed.

‍

Q: How much does faucet installation cost in Summerville, SC?

‍

‍A: A standard faucet installation is quick and affordable. Cost depends on what you're replacing (a straight swap versus adding new supply lines or making adjustments under the sink), and whether it's a simple or complex faucet. We give upfront pricing before starting.

‍

Q: How long does faucet installation take?

‍

‍A: Most single-faucet installs take 30 to 90 minutes. Simple swaps (same style, same connections) are on the quicker end. Complex installs (touchless faucets with electrical, faucets with different mounting configurations than what's there, or ones requiring new supply lines) take longer.

‍

Q: I bought a faucet online. Will you install it?

‍

‍A: Yes. Bring us any faucet and we can install it, as long as it's a standard residential fixture with all its parts. If there's a problem with the fixture itself (missing parts, defective unit), we'll let you know so you can return or exchange it.

‍

Q: Do I need to buy new supply lines?

‍

‍A: Not always, but often. If the existing lines are stiff, corroded, or the wrong length for the new faucet, we recommend fresh supply lines with the install. New lines are inexpensive and prevent a leak issue down the road. We'll recommend based on what we see.

‍

Q: Can you install a faucet during my kitchen or bathroom remodel?

‍

‍A: Yes. We regularly coordinate with contractors and homeowners on remodels. Timing matters — the faucet install usually needs to happen after the countertop is set but before you use the sink. We can plan around your other work.

‍

Q: Do you install touchless or smart faucets?

‍

‍A: Yes. Touchless faucets require an electrical connection (some are battery-powered, others need a hardwired connection). We can install either type. If your setup doesn't have power near the sink, we'll flag that before starting.

‍

Q: What if my existing plumbing doesn't fit the new faucet?

‍

‍A: Common with older Lowcountry homes and specialty faucets. If your existing connections don't match, we adapt with the right fittings, extenders, or new supply lines. If a bigger plumbing change is needed, we'll show you what's involved and price it before touching anything.

‍

Q: How do I choose the right faucet for my sink?

‍

‍A: A few things to think about: number of pre-drilled holes in your sink, sink size and depth (some faucets are too tall or short for certain sinks), how you use the faucet (single-handle is easier for one-handed use, double-handle gives more temperature control), and finish (chrome, brushed nickel, matte black — matches your other fixtures). If you send us a photo of your current setup, we can point you in the right direction before you buy.

‍

Q: Do you install outdoor faucets and hose bibs?

‍

‍A: Yes. Outdoor spigot installs — new location or replacement of an existing bib — are common calls, especially around spring when people notice the old one is leaking or won't close all the way.

‍